Search found 10 matches
- Mon Oct 18, 2010 6:36 pm
- Forum: General Discussion
- Topic: Need help with cold start issue.
- Replies: 8
- Views: 12909
Re: Need help with cold start issue.
Thats great. Thanks Mak. I could actually get it to dead 0 but again it still caused starting issues.
- Sun Oct 17, 2010 10:53 pm
- Forum: General Discussion
- Topic: Need help with cold start issue.
- Replies: 8
- Views: 12909
Re: Need help with cold start issue.
Well I seem to have this issue sorted. But in a strange way. My car always seems to run with LTFT at -2 on petrol. So I was matching this with the gas. I did ANOTHER autocalibrate (probably my 20th) and it gave me a very lean map. I added 5% which brought my LTFT to +2 but the car starts and runs pe...
- Mon May 03, 2010 9:10 pm
- Forum: General Discussion
- Topic: Can vapouriser be plumbed in serial
- Replies: 0
- Views: 6077
Can vapouriser be plumbed in serial
Hi all, I'm still going through some issues with my car stalling but I've found it runs perfect when it's warm out. Anything below 7 degrees and it stalls when switching over. I usually get a strong smell of gas at switch over too, which I don't get when it's warm out. This makes me think the vapour...
- Thu Feb 25, 2010 11:55 pm
- Forum: General Discussion
- Topic: Need help with cold start issue.
- Replies: 8
- Views: 12909
Re: Need help with cold start issue.
Thanks Mak.
I'll give the manifold a check over this weekend.
I'll give the manifold a check over this weekend.
- Thu Feb 25, 2010 10:36 am
- Forum: General Discussion
- Topic: Need help with cold start issue.
- Replies: 8
- Views: 12909
Re: Need help with cold start issue.
Thanks Mark, I've tried a couple of times running on petrol for 3-4 days then checking fuel trims on lpg by switching over. I've got a perfect rich lean toggle at all rpms now. It just doesn't like running with the change over anything below 50 at the moment. If I set the change over to 30 or 40 deg...
- Tue Feb 16, 2010 9:30 pm
- Forum: General Discussion
- Topic: Need help with cold start issue.
- Replies: 8
- Views: 12909
Need help with cold start issue.
Hi all. I need some advice if possible. I have a 4.4 Range rover V8 with the Bmw M62 engine. My lpg system is an OMVL dream 21N. The problem I've been struggling with for the last few months are starting the car from cold after it's been run on gas. If I set the change over temp to 48 degrees (fuel ...
- Mon Oct 12, 2009 8:19 pm
- Forum: General Discussion
- Topic: OMVL dream Need tuning help.
- Replies: 0
- Views: 5087
OMVL dream Need tuning help.
Hi all. Thought I would throw this out there and see what your thoughts were. I've got an L322 Range rover which has the BMW 4.4 V8 engine. I had an OMVL Dream system fitted which is giving me one annoying problem which I've been trying to fix for ages. I feel like I'm going around in circles. Whats...
- Thu Nov 01, 2007 10:56 pm
- Forum: General Discussion
- Topic: Flashlube on 3.0 V6 Jaguar
- Replies: 5
- Views: 7147
Re: Flashlube on 3.0 V6 Jaguar
Thanks keith... I fitted the flashlube today. Got it installed with minimum fuss. I installed the jet just behind the butterfly in the throttle body. After removing the intake tubing I realised this is really the only place it can go as that manifold branches really quicky after the throttle body. K...
- Wed Oct 31, 2007 6:28 pm
- Forum: General Discussion
- Topic: Flashlube on 3.0 V6 Jaguar
- Replies: 5
- Views: 7147
Re: Flashlube on 3.0 V6 Jaguar
Ok got that bit. Another small question where's the good place to locate the bottle. I'm struggling for space unless I lay the bottle at a 45 degree angle against the suspension tower. Only other place I can see is under the trim at the bottom of the window next to the brake servo. But this means cu...
- Tue Oct 30, 2007 11:36 am
- Forum: General Discussion
- Topic: Flashlube on 3.0 V6 Jaguar
- Replies: 5
- Views: 7147
Flashlube on 3.0 V6 Jaguar
Hello all I'm new to the forum and I'm in need of some advice. I've had an lpg system fitted to my Jaguar S type for about a year now. Recently I was talking to my installer and he was telling me there is still some doubt as to wether my engine needs flashlube or not. As the ford engine is on the li...