diaphram
Hello..if i fit new diaphram in my prins vsi ...will i need to RE calibrate...lpg was going stright into cooling system...ive bypassed vaporiser and I am now gathering info prior to going any further..its a prins vsi 1 ON ROVER 75 1.8....ANY INFO APPRECIATED mike...also where to attain parts
-
mak-uk
- Posts:288
- Joined:Mon Sep 03, 2007 8:48 pm
- LPG System:Prins VSI
- Car:BMW 540iA Sport
- Location:All over the UK
Re: diaphram
Hi
You may be able to rebuild it with an overhaul but you need to identify what type of reducer it is (old or new).. there is a letter in the part number on the label. You can only rebuild it if the backing plate isn't too badly corroded.
You may be able to rebuild it with an overhaul but you need to identify what type of reducer it is (old or new).. there is a letter in the part number on the label. You can only rebuild it if the backing plate isn't too badly corroded.
Mak
Site Owner
2001 BMW 540i Auto Sport Saloon
~300 BHP; ~320 ft/lbs, Prins VSI system
Site Owner
2001 BMW 540i Auto Sport Saloon
~300 BHP; ~320 ft/lbs, Prins VSI system