hi i am new to lpg i am wanting to convert my discovery v8 to lpg i will be doing it with my mate who has converted 3 landrovers before what i am after is some general info and to know if OMVL Dream XXI(N) lpg kits are anygood or am i better going for a single point one. i am good at mechanical work and i am a electrician so the wire shouldnt be any hassle.
thanks for your help
richard
new to lpg wanting to convert my discovery
-
- Posts: 288
- Joined: Mon Sep 03, 2007 8:48 pm
- LPG System: Prins VSI
- Car: BMW 540iA Sport
- Location: All over the UK
Re: new to lpg wanting to convert my discovery
Hi
If the vehicle is injected you're better off with a later multi point injection system
The OMVL Dream should be good enough.
If the vehicle is injected you're better off with a later multi point injection system
The OMVL Dream should be good enough.
Mak
Site Owner
2001 BMW 540i Auto Sport Saloon
~300 BHP; ~320 ft/lbs, Prins VSI system
Site Owner
2001 BMW 540i Auto Sport Saloon
~300 BHP; ~320 ft/lbs, Prins VSI system
-
- Posts: 3
- Joined: Sun May 23, 2010 8:23 pm
- LPG System: OMVL Dream XXI maybe
- Car: discovery v8
Re: new to lpg wanting to convert my discovery
hi i posted about my discovey before but i have been a offered a lpg frount end kit but it is off a carbureter engine will it fit mine with some extra parts to fool the injectors and if i get a conector to get it in to the air intake
richard
richard
-
- Posts: 3
- Joined: Sun May 23, 2010 8:23 pm
- LPG System: OMVL Dream XXI maybe
- Car: discovery v8
Re: new to lpg wanting to convert my discovery
sparky_19 wrote:hi i posted about my discovey before but i have been a offered a lpg frount end kit but it is off a carbureter engine will it fit mine with some extra parts to fool the injectors and if i get a conector to get it in to the air intake
richard
i am right in thinking all i need to make it from carburettor to injectioin is the mixer and petrol emulator and a lambda control with stepper motor ?
-
- Posts: 288
- Joined: Mon Sep 03, 2007 8:48 pm
- LPG System: Prins VSI
- Car: BMW 540iA Sport
- Location: All over the UK
Re: new to lpg wanting to convert my discovery
I haven't personally fitted one of the older mixer type systems for carbs but I do know it's not advisable to fit them to electronically fuel injected cars.
Mak
Site Owner
2001 BMW 540i Auto Sport Saloon
~300 BHP; ~320 ft/lbs, Prins VSI system
Site Owner
2001 BMW 540i Auto Sport Saloon
~300 BHP; ~320 ft/lbs, Prins VSI system